Spatial analysis of resources and environmental carrying capacity in Iran

Urbanization and mass movement of the population from rural areas and small cities to megacities have led to environmental, economic, and social problems in Iran. In dealing with these challenges, assessing resource and environmental carrying capacity (RECC) is considered an effective method to leverage space and capital to achieve sustainable development. This study aimed to rank the provincial RECC in Iran. Toward this purpose, environmental indices were generated from remotely sensed and statistical census data. Then, the provinces were scored in terms of environmental, economic, and infrastructural carrying capacities, and RECC using the mean variance analysis method. Results demonstrated that in most areas, there is no relationship between economic and infrastructural capacities and development. Statistically, a correlation coefficient of −0.53 between economic and environmental carrying capacities indicated excessive use of environmental capacities. Moreover, the spatial distribution pattern of environmental, economic, and infrastructural carrying capacity was entirely heterogeneous between the provinces; there was a northeast–southwest pattern in terms of infrastructural capacity and an economic pattern from north to south. The distribution pattern of RECC is most consistent with the environmental capacity, pointing at the high weight of the indicators of the RECC model. In conclusion, this research offers a new vision for policymakers and provides a theoretical and applicable framework for implementing sustainable strategies in land-use planning. It is recommended that the RECC concept and tools can be used not only for planning but also for measuring the efficiency of spatial development programs and establishing land balances in the region.     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.     

膨润土吸附水中有机污染物的应用进展

论述了膨润土的吸附机理,介绍了膨润土的物理及化学改性方法及其对有机染料废水,焦化废水,烟草废水,煤泥水,含酚类、石油烃类、抗生素废水及微污染水等的处理效果。针对膨润土作为环保吸附剂存在的问题指出了今后的研究方向:1)将研究成果应用于实际废水;2)研究环境友好且效果好的改性工艺及材料;3)研究新的吸附剂制备形式;4)加大膨润土在废气处理上的研究力度;5)研制吸附效果更佳且能处理复杂成分污水的新型复合吸附剂。     

固定源排污许可证监测管理制度研究

依靠排污许可证管理,固定源执行由行业排放标准为主正逐步过渡到"国家行业排放标准——单一源排放标准"双层排放标准,并以执行更全面和精准的单一源排放标准为主,对应的监测要求及考核方式更加多样化。对监测管理制度进行设计,明确固定源制定自行监测方案和守法监测的主体责任,厘清许可证核发部门、属地监测、执法部门的监管职责。系统设计"固定源制定并提交自行监测方案-核发部门审核-方案纳入排污许可证中成为规定-依规定自行监测和记录-固定源提交执行报告-监管部门审计式审核-执法监测和执法检查"的全过程管理机制,设计标准化的监管计划程序落实证后监管与执法监测,明晰监管部门的有限责任。     

渤海湾入海溶解无机氮总量控制研究

基于渤海湾近岸海域的实际调查结果,采取生态物理耦合模型,对渤海湾的主要污染物-溶解无机氮(DIN)的基准环境容量和极小剩余海洋环境容量进行了计算。结果表明,渤海湾DIN的极小剩余海洋环境容量在Ⅰ类和Ⅱ类水质标准下均为负值,渤海湾的DIN已经超标。结合实际的海水功能区水质管理目标,应重点控制非点源的排放,加强上游携带入境污染物的处理,从总量上控制DIN入海污染通量,改善渤海湾水质。     

环境空气质量新标准对郑州和开封空气质量评价的影响

利用河南省环境空气质量新标准实施一期城市(郑州、开封)2013年的环境空气自动监测数据,分析了实施《环境空气质量标准》(GB 3095—2012)对这2个城市空气质量评价的影响。研究发现,若采用新标准,郑州、开封污染物年均浓度超标情况加重;城市空气质量达标率从51%、71%下降到35%和31%,下降了16和40个百分点;PM2.5的纳入是空气质量达标率下降的最主要原因,大于NO2标准的收严和CO、O3纳入评价指标的影响,其超标率分别为58%(郑州)和63%(开封);且PM2.5取代PM10成为郑州、开封的首要污染物,其作为首要污染物的比例均大于70%。     

加轴压卸围压下含瓦斯煤岩损伤变形的能量演化机制

采动影响下含瓦斯煤岩的损伤变形是一个极其复杂的非线性过程，单纯依靠传统经典弹塑性力学无法准确分析其破坏机理。针对此情况，通过试验研究了不同初始围压条件下含瓦斯煤岩的损伤变形特征，并分析了损伤变形与能量演化规律之间的内在联系。研究表明:初始围压越高，煤样破坏时强度越大，脆性破坏特征越明显，瓦斯流量急剧增加幅度越大，煤样破坏时积累的总能量和弹性应变能越多，且初始围压与弹性能之间满足对数函数关系。采用累积耗散能定义了煤岩损伤变量，并分析了不同阶段损伤与渗透率之间的演化关系。     

Validation of a booted finite element model of the WIAMan ATD lower limb in component and whole-body vertical loading impacts with an assessment of the boot influence model on response

Objective: A novel anthropomorphic test device (ATD) representative of the 50th percentile male soldier is being developed to predict injuries to a vehicle occupant during an underbody blast (UBB). The main objective of this study was to develop and validate a finite element (FE) model of the ATD lower limb outfitted with a military combat boot and to insert the validated lower limb into a model of the full ATD and simulate vertical loading experiments.

Methods: A Belleville desert combat boot model was assigned contacts and material properties based on previous experiments. The boot model was fit to a previously developed model of the barefoot ATD. Validation was performed through 6 matched pair component tests conducted on the Vertically Accelerated Loads Transfer System (VALTS). The load transfer capabilities of the FE model were assessed along with the force-mitigating properties of the boot. The booted lower limb subassembly was then incorporated into a whole-body model of the ATD. Two whole-body VALTS experiments were simulated to evaluate lower limb performance in the whole body.

Results: The lower limb model accurately predicted axial loads measured at heel, tibia, and knee load cells during matched pair component tests. Forces in booted simulations were compared to unbooted simulations and an amount of mitigation similar to that of experiments was observed. In a whole-body loading environment, the model kinematics match those recorded in experiments. The shape and magnitude of experimental force–time curves were accurately predicted by the model. Correlation between the experiments and simulations was backed up by high objective rating scores for all experiments.

Conclusion: The booted lower limb model is accurate in its ability to articulate and transfer loads similar to the physical dummy in simulated underbody loading experiments. The performance of the model leads to the recommendation to use it appropriately as an alternative to costly ATD experiments.     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征，在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征，对应的振铃数柱状图呈U型；上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升，曲线呈倒S型；煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段；循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性，对煤体裂隙演化和破坏模式均有明显影响。     

简述排污许可制下火电行业现状及发展

实施排污许可制度,是强化排污者责任、提高固定污染源环境管理效能、改善环境质量的重要制度保障。火电行业作为典型的高架固定源,先行试点实施排污许可制度。通过分析火电行业发展和环保现状,结合排污许可管理要点,简述排污许可制对火电行业发展的影响。